220V/DC 380/AC EV Charging Stationfloor Type Wholesale EV Charger

• Number of Charging Interfaces: One Pile with One Charge
• Location: Private Use
• Installation: Floor Type
• Charge Method: Normal Charge
• After-Sales Service: Only Change, Not Repair
• Type: Slow EV Charging Station
• Model NO.: SCE-CE/AC-11/7
• Certification: CCC, CE, ISO, TUV, Ma/CNAS/, RoHS
• Warranty: 24 Months
• Transport Package: Carton Packing
• Trademark: SCE
• Origin: China
• HS Code: 8504401990
• Production Capacity: 10000 Pieces Per Year

Product Description

General Specification
Charging type	Level 2 Mode 3
AC input/output power and current	7kW/32A
Input /output voltage	165-265V,Single phase
Operating frequency	47-63Hz
Connector type	Type 2,AC 277V,40A
Protection	Undervoltage/Overvoltage,Overcurrent,Overheat,Short circuit, Leakage,Lightning protection
Dimensions	310*214*90 mm/12.2*8.4*3.5 in
Net weight	6.5 kg/14.3 Ibs
Operating Environment
Protection rating	IP 55
Operating temperature	-20ºC-+55ºC
Storage temperature	-40ºC-+85ºC
Relative humidity	5-95%,without condensation
Maximum altitude	2000m
RCD current	30mA
Connection &Communication
RFID	Optional
WIFI OCPP 1.6J	Optional
4G OCPP 1.6J	Optional
Certificate
CE	UKCA
RCM	ROHS (in process)
WEEE(in process)	REACH (in process
TUV (in process)	ANNATEL (in process)
ETSI EN 303645(in process)	BQB

a.Do not use a damaged and/or soiled charger. Check the cable and plug connectionfor damage and soiling before use.
b.Do not modify or repair any of the electrical components. Only get experts to correctfaults and carry out repairs on the charger.c.Power supply testing and installation and initial operation of the electrical socket forthe charger may only be carried out by a qualified electrician. The qualified electrician isfully responsible for compliance with the relevant standards and regulations.d.The charger should only be operated in properly earthed power supply systems.e.The cross-section of the power cable for the electrical socket is defined in accordancewith the wire length and the locally applicable regulations and standards.f.Protect electrical sockets and plug connections from moisture, water and other liquidsDo not submerge the control box or charging connector in water, and don't step on,pull, fold or knot the cable.
g.Ensure charging connector, plug, cable and control box are free of any abnormalitiessuch as scratches, rusts, cracks, etc.
h.Do not charge if the socket is damaged, rusted, cracked or loosely connected, thencontact the professionals to dispose.
i.Wipe with a clean and dry cloth if the plug gets dirty or wet.j.Ensure power plug and socket are consistent before charging, especially the Current& Voltage.
k.Please check the input current and make sure to reduce charging current to below theinput current.
l.Do not place the charging cable near high temperature object when it is working.m.lt is recommended not to charge in direct sunlight to avoid stopping charging due tothe high temperature of the charger